Fast Guide Repair
Breaking a rod guide doesnt have to end your day on the water. The Quick Clip Rod Guide Replacement lets you make a fast, reliable repair right where you areno special tools, no epoxy, no waiting. Designed for on-the-spot fixes, this kit allows you to replace a damaged guide in minutes so you can get back to casting, fighting fish, and enjoying the trip instead of packing it in early. Compact, simple, and effective, its a must-have backup for boats, kayaks, and tackle bags.
Key Features
- On-the-Water RepairsReplace a broken rod guide in minutes without leaving your fishing spot
- Multiple Guide SizesIncludes three guide sizes to fit a wide range of rod diameters
- Secure Mounting SystemUses 3M double-sided adhesive and zip ties for a solid, reliable hold
- Simple InstallationNo special tools or rod-building skills required
- Made in the USABuilt with quality materials you can trust when it matters
Dont End the Day Early
Keep this kit in your gear and turn a broken guide into a quick fix that gets you right back to fishing.
Instructions
STEP 1:Remove existing broken or damaged guide. Clean / prep rod surface just below the broken guide. Test fit Quick Clip size options to determine which Clip fits snug onto the rod. Be sure the Quick Clip isnt too loose or overly flexed.
STEP 2:Apply 3M adhesive (provided) to the prepared area just below the broken guide. Next, snap your new Quick Clip directly over the 3M adhesive strip. Be sure the Quick Clip is aligned with the other guides on the rod.
STEP 3:Thread two cable ties (provided) through the slots located on either side of your Quick Clip. Be sure the heads of the cable ties are secured on the opposite side of the rod from the new Quick Clip. Tighten cable ties until the Quick Clip is locked into place. Remove excess from each cable tie.
